Take the Guess Work Out of Painting
Many people have leftover paint because it’s not easy to know how much paint to purchase in the first place. Most homeowners and DIYers who paint occasionally need help estimating the right amount of paint needed for their projects. They simply lack the experience that a professional painter has in estimating how much paint is needed for the job at hand.
When estimating how much paint you need, there are several variables to take into account. We always recommend measuring your room, bringing your measurements to the paint store, and asking the staff for help figuring out how much paint to buy.
Below are the types of questions your paint store expert may ask in order to give you the best advice. Being ready to answer these questions will help determine how much paint you need for your next project.
1. What is the square footage?
The first thing to determine is the size of the surface you want to paint. You’ll need to know the surface area of the walls of a room or the outside of your house. Most paint companies feature calculator tools on their websites that allow you to enter room dimensions to calculate an estimate of how much paint to buy. The results from these calculators vary because coverage rates vary by brand and quality.
To calculate the size of your space, measure the width and height of each wall. For each wall, multiply the width times the height to get the square footage. Add the square footages together to get the total. Then measure any windows, doors, or other breaks in the wall and subtract their square footage from your original calculation. Now you have the area – the number of square feet you need to cover.
Divide the area by the coverage rate, if you know it. (Check the label on the can.) If you don’t know the coverage rate, use 350 to get a rough estimate. Most coverage rates are between 300-400 square feet per gallon. For example, the square footage of a 10’x10’ room with a ceiling height of 10 feet is about 400 square feet. If the coverage rate is 400 square feet per gallon, you’d need one gallon. If the coverage rate is 300 square feet per gallon, you’d need 1.33 gallons. After subtracting windows and doors, you’d probably only need one gallon for a typical 10’x10’ room.
By the same method, a 20’x20’ room (with 10 feet ceilings), would probably need two gallons.
These figures are just a start. You also need to take the following factors into account.
2. Are you making a big color change?
If the new paint color is similar to the old paint color, you will need fewer coats. However, if you change from a very dark color to a very light color, or from a very light to a very dark one, you may need three, or even four coats.
Some vibrant and dark colors, especially red, orange and purple, may take even more coats to get an even finish.
3. Is the surface textured?
Textured walls require more paint than smooth walls because all those bumps mean that a textured surface actually has more surface area than a smooth one . The greater the texture, the more paint is needed — you may need up to 50 percent more paint for rough textures.
4. What sheen? Shiny or flat?
As sheen decreases, coverage increases. Flat paints require less paint to cover, while semi-gloss and glossy paints require more paint. Generally, a job that takes two coats of flat paint typically takes three or more coats of semi-gloss or glossy paint.
5. Have you used primer?
New, unprimed drywall, plaster, and bare wood absorb more paint and require more coats than surfaces that have already been primed or painted with a base coat. Besides helping to achieve better adhesion, primer fills in tiny surface holes. Primer prevents the top coat from being absorbed and reduces the number of coats needed.
Although primer is usually white, you can often ask your paint retailer to tint primer so that the color of the primer is closer to the final color. This will reduce the number of coats you’ll need.
Primers are usually less expensive than paint, and they are specially formulated to improve adhesion and fill porous surfaces. You can also use up paint leftover from a previous project by applying it as a base coat to even out the surface and color.
6. Do you need tinted primer?
Consider using tinted primer for certain color changes. Some paint retailers will tint primer for you, but you should know that there are limitations to how much pigment can be added to primer. The color will not be the same as the final coat, but tinting primer will reduce the number of top coats you’ll need. Note: use gray primer when changing the wall color to red.
Use It Up
Using up what you have is a great way to reduce leftover paint.
Here are a few ideas to get you started.
Recycle the Rest
Recycle the Rest
When you’ve run out of ways to use up your leftover paint, recycle it with PaintCare.
- Know what types of paint can be accepted: Program Products
- Learn how to prepare your paint for drop off: How to Recycle
- Find a PaintCare drop-off site near you: PaintCare Site Locator